Турбинный расходомер – высочайшая точность в расширенном диапазоне
Турбинные расходомеры ТригасДМ идеальное решение измерения потока жидкости с высокой точностью, быстрым временем отклика, и малых габаритах. Они обеспечивают отличную надежность в процессе работы при изменение постоянного потока и рабочих температур. Они не чувствительны к вибрациям, ударам, влажности, доступна специальная версия IP67 включая Пикофф-датчик и электронный усилитель.
Турбинные расходомеры ТригасДМ имеют широкий диапазон применения.К ним относится мониторинг расхода топлива и охлаждающей жидкости в разработке и испытаниях двигателей, дозирование точных количеств количеств в пищевой и фармацевтической промышленности, мониторинг и расход сверхчистой воды в научных целях и прочее.
Измерение расхода для требовательных приложений
Загружая видео, вы принимаете политику конфиденциальности YouTube.
Узнать больше
Технология мобильных измерений для автомобилей
Специальная облегченная версия ДМ серии была разработана для применения в ограниченных пространствах. Благодаря чрезвычайно компактной конструкции корпуса расходомер, установленный между двумя концами шланга, практически не занимает места. Турбинный расходомер ТригасДМ из нержавеющей стали существенно легче чем любой сравниваемый расходомер , и поэтому является первым для выбора для мобильных измерений и тест-драйвов.
Типичным применением является измерение расхода топлива, охлаждающей жидкости, моторного масла, хладогента ( для примера хладогент R134a)…
Совместно с компактной эффективной электроникой Lysis турбины могут быть размещены свыше 15 метров от дата-логгера. На грузовиках, легковых машинах или мотоциклах- ДМ серия обеспечивает в режиме реального времени температурную компенсацию, высокую точность , быстрый отклик, компактные размеры и высокую надежность при привлекательном соотношении цена- качество.
Преимущества:
- Новая конструкция ротора обеспечивает лучшую линейность и до 15% меньшую потерю давления
- Безошибочный цифровой импульсный выход
- Прецизионные шарикоподшипники обеспечивают стабильность и оптимальные результаты при более низких расходах
- Диапазон измерения 0,05 до 1700 л/мин
- Датчики со встроенными датчиками температуры
- Совместимые технологии Cox AN/ANC и Flow Technology FT/NT
| Technical Data: | |
| – Linear Flow Range: | 0,5 l/min to 5 l/min (0.13 GPM to 1.3 GPM) |
| – Extended Flow Range: | 0,05 l/min to 5,5 l/min (0.013 GPM to 1.5 GPM) |
| – Operating Pressure: | up to 540 bar |
| – Pressure Loss (at 70% linear flow): | 0,08 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±2% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 14700 Impulse/l |
| – Max. Frequency: | 1350 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 161 g |
| – Inner Diameter: | 7,6 mm |
| – Length: | 62,2 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | ½“ |
| – Connection Thread: | ¾“ -16UNJF-3A |
| – Recommended Prefiltration: | 10µ |
| – Recommended Inlet: | 76 mm |
| – Recommended Outlet: | 38 mm |
| Technical Data: | |
| – Linear Flow Range: | 0,95 l/min to 12 l/min (0.25 GPM to 3.2 GPM) |
| – Extended Flow Range: | 0,1 l/min to 13 l/min (0.03 GPM to 3.4 GPM) |
| – Operating Pressure: | up to 540 bar |
| – Pressure Loss (at 70% linear flow): | 0,19 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 8700 Impulse/l |
| – Max. Frequency: | 2000 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 161 g |
| – Inner Diameter: | 7,6 mm |
| – Length: | 62,2 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | ½“ |
| – Connection Thread: | ¾“ -16UNJF-3A |
| – Recommended Prefiltration: | 10µ |
| – Recommended Inlet: | 76 mm |
| – Recommended Outlet: | 38 mm |
| Technical Data: | |
| – Linear Flow Range: | 1,9 l/min to 20 l/min (0.5 GPM to 5.3 GPM) |
| – Extended Flow Range: | 0,2 l/min to 24 l/min (0.05 GPM to 6.3 GPM) |
| – Operating Pressure: | up to 450 bar |
| – Pressure Loss (at 70% linear flow): | 0,163 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 4860 Impulse/l |
| – Max. Frequency: | 2000 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 154 g |
| – Inner Diameter: | 9,4 mm |
| – Length: | 62,2 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | ½“ |
| – Connection Thread: | ¾“ -16UNJF-3A |
| – Recommended Prefiltration: | 10µ |
| – Recommended Inlet: | 94 mm |
| – Recommended Outlet: | 47 mm |
| Technical Data: | |
| – Linear Flow Range: | 2,8 l/min to 33 l/min (0.74 GPM to 8.7 GPM) |
| – Extended Flow Range: | 0,3 l/min to 38 l/min (0.08 GPM to 10 GPM) |
| – Operating Pressure: | up to 410 bar |
| – Pressure Loss (at 70% linear flow): | 0,3 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 3700 Impulse/l |
| – Max. Frequency: | 2100 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 150 g |
| – Inner Diameter: | 10,2 mm |
| – Length: | 62,2 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | ½“ |
| – Connection Thread: | ¾“ -16UNJF-3A |
| – Recommended Prefiltration: | 10µ |
| – Recommended Inlet: | 102 mm |
| – Recommended Outlet: | 51 mm |
| Technical Data: | |
| – Linear Flow Range: | 3 l/min to 40 l/min (0.79 GPM to 10.6 GPM) |
| – Extended Flow Range: | 0,4 l/min to 48 l/min (0.11 GPM to 12.7 GPM) |
| – Operating Pressure: | up to 410 bar |
| – Pressure Loss (at 70% linear flow): | 0,21 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 2400 Impulse/l |
| – Max. Frequency: | 2000 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 148 g |
| – Inner Diameter: | 11,2 mm |
| – Length: | 62,2 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | ½“ |
| – Connection Thread: | ¾“ -16UNJF-3A |
| – Recommended Prefiltration: | 10µ |
| – Recommended Inlet: | 112 mm |
| – Recommended Outlet: | 56 mm |
| Technical Data: | |
| – Linear Flow Range: | 4,5 l/min to 60 l/min (1.2 GPM to 16 GPM) |
| – Extended Flow Range: | 0,6 l/min to 70 l/min (0.16 GPM to 18.5 GPM) |
| – Operating Pressure: | up to 410 bar |
| – Pressure Loss (at 70% linear flow): | 0,61 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 1700 Impulse/l |
| – Max. Frequency: | 2000 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 282 g |
| – Inner Diameter: | 12,8 mm |
| – Length: | 69,1 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | ¾“ |
| – Connection Thread: | 7/8“ -14UNJF-3A |
| – Recommended Prefiltration: | 10µ |
| – Recommended Inlet: | 128 mm |
| – Recommended Outlet: | 64 mm |
| Technical Data: | |
| – Linear Flow Range: | 7,6 l/min to 90 l/min (2 GPM to 23.8 GPM) |
| – Extended Flow Range: | 0,9 l/min to 95 l/min (0.24 GPM to 25.1 GPM) |
| – Operating Pressure: | up to 410 bar |
| – Pressure Loss (at 70% linear flow): | 0,64 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 1000 Impulse/l |
| – Max. Frequency: | 2000 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 383 g |
| – Inner Diameter: | 14,3 mm |
| – Length: | 82,6 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | ¾“ |
| – Connection Thread: | 1-1/16“ -12UNJ-3A |
| – Recommended Prefiltration: | 10µ |
| – Recommended Inlet: | 143 mm |
| – Recommended Outlet: | 72 mm |
| Technical Data: | |
| – Linear Flow Range: | 19 l/min to 220 l/min (5 GPM to 58.1 GPM) |
| – Extended Flow Range: | 2,2 l/min to 240 l/min (0.58 GPM to 63.4 GPM) |
| – Operating Pressure: | up to 350 bar |
| – Pressure Loss (at 70% linear flow): | 0,39 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 450 Impulse/l |
| – Max. Frequency: | 1700 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 550 g |
| – Inner Diameter: | 21,9 mm |
| – Length: | 90,4 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | 1“ |
| – Connection Thread: | 1-5/16“ -12UNJ-3A |
| – Recommended Prefiltration: | 20µ |
| – Recommended Inlet: | 219 mm |
| – Recommended Outlet: | 110 mm |
| Technical Data: | |
| – Linear Flow Range: | 34 l/min to 400 l/min (9 GPM to 106 GPM) |
| – Extended Flow Range: | 3,8 l/min to 490 l/min (1 GPM to 130 GPM) |
| – Operating Pressure: | up to 350 bar |
| – Pressure Loss (at 70% linear flow): | 0,62 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 240 Impulse/l |
| – Max. Frequency: | 1700 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 957 g |
| – Inner Diameter: | 25,4 mm |
| – Length: | 103 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | 1 1/4“ |
| – Connection Thread: | 1-5/8“ -12UNJ-3A |
| – Recommended Prefiltration: | 20µ |
| – Recommended Inlet: | 254 mm |
| – Recommended Outlet: | 127 mm |
| Technical Data: | |
| – Linear Flow Range: | 57 l/min to 700 l/min (15.1 GPM to 185 GPM) |
| – Extended Flow Range: | 6 l/min to 820 l/min (1.6 GPM to 217 GPM) |
| – Operating Pressure: | up to 250 bar |
| – Pressure Loss (at 70% linear flow): | 0,86 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 110 Impulse/l |
| – Max. Frequency: | 1500 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 1208 g |
| – Inner Diameter: | 33,4 mm |
| – Length: | 116,6 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | 1 1/2“ |
| – Connection Thread: | 1-7/8“ -12UNJ-3A |
| – Recommended Prefiltration: | 50µ |
| – Recommended Inlet: | 334 mm |
| – Recommended Outlet: | 167 mm |
| Technical Data: | |
| – Linear Flow Range: | 83 l/min to 1100 l/min (21.9 GPM to 291 GPM) |
| – Extended Flow Range: | 10 l/min to 1300 l/min (2.6 GPM to 344 GPM) |
| – Operating Pressure: | up to 250 bar |
| – Pressure Loss (at 70% linear flow): | 0,34 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 65 Impulse/l |
| – Max. Frequency: | 1300 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | 2614 g |
| – Inner Diameter: | 44,5 mm |
| – Length: | 154 mm |
| – Connection: | AN threaded connection |
| – Connection Size: | 2“ |
| – Connection Thread: | 2-1/2“ -12UNJ-3A |
| – Recommended Prefiltration: | 50µ |
| – Recommended Inlet: | 445 mm |
| – Recommended Outlet: | 222,5 mm |
| Technical Data: | |
| – Linear Flow Range: | 151 l/min to 1510 l/min (39.9 GPM to 398,9 GPM) |
| – Extended Flow Range: | 17 l/min to 1700 l/min (4,5 GPM to 449 GPM) |
| – Operating Pressure: | N/A |
| – Pressure Loss (at 70% linear flow): | 0,40 bar |
| – Temperature Range: | -270°C to 400°C (-454°F to 752°F) |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% of measurement |
| – Repeatability: | ≤±0,05% of measurement |
| – Linearity in Linear Flow Range: | ≤±0,5% of measurement |
| – Linearity with Linearizer: | ≤±0,1% of measurement |
| – K-Factor: | 28 Impulse/l |
| – Max. Frequency: | 800 Hz |
| – Housing and Turbine Material: | Stainless Steel |
| – Ball Bearing Material: | Ceramic bearings, Steel cage |
| – Weight: | N/A |
| – Inner Diameter: | 59,7 mm |
| – Length: | 154,5 mm |
| – Connection: | HS hose connection |
| – Connection Size: | |
| – Connection Thread: | |
| – Recommended Prefiltration: | 50µ |
| – Recommended Inlet: | 598 mm |
| – Recommended Outlet: | 299 mm |
| Technical Data: | |
| – Linear Flow Range: | 250 l/min bis 2500 l/min |
| – Extendet Flow Range: | 28 l/min bis 2840 l/min |
| – Operating Pressure: | N/A |
| – Pressure Loss (at 70% linear flow): | 0,40 bar |
| – Temperatur Range: | -270°C bis 400°C |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% vom Messwert |
| – Repeatability: | ≤±0,05% vom Messwert |
| – Linearity in Linear Flow Range: | ≤±0,5% vom Messwert |
| – Linearity with Linearizer: | ≤±0,1% vom Messwert |
| – K-Faktor: | 15 Impulse/l |
| – Max. Frequency: | 650 Hz |
| – Housing and Turbine Material: | Edelstahl |
| – Ball Bearing Material: | Keramikkugeln, Edelstahlkäfig |
| – Weight | 12,5 kg |
| – Inner Diameter: | 73 mm |
| – Length: | 254 mm |
| – Connection: | Flanschen DIN EN1092-1 / ASME/ANSI B16.5 |
| – Connection Size: | auf Anfrage |
| – Connection Thread: | – |
| – Recommended Prefiltration: | 50µ |
| – Recommended Inlet: | 750 mm |
| – Recommended Outlet: | 375 mm |
| Technical Data: | |
| – Linear Flow Range: | 475 l/min bis 4750 l/min |
| – Extended Flow Range: | 57 l/min bis 5700 l/min |
| – Operating Pressure: | N/A |
| – Pressure Loss (at 70% linear flow): | 0,40 bar |
| – Temperature Range: | -270°C bis 400°C |
| – Response Time: | <3 ms |
| – Calibration Accuracy: | ≤±0,03% vom Messwert |
| – Repeatability: | ≤±0,05% vom Messwert |
| – Linearity in linear Flow Range: | ≤±0,5% vom Messwert |
| – Linearity with Linearizer: | ≤±0,1% vom Messwert |
| – K-Faktor: | 5,5 Impulse/l |
| – Max. Frequency: | 600 Hz |
| – Housing and Turbine Material: | Edelstahl |
| – Ball Bearing Material: | Keramikkugeln, Edelstahlkäfig |
| – Weight | 20 g |
| – Inner Diameter: | 98 mm |
| – Length: | 305 mm |
| – Connection: | Flanschen DIN EN1092-1 / ASME/ANSI B16.5 |
| – Connection Size: | auf Anfrage |
| – Connection Thread: | – |
| – Recommended Prefiltration: | 50µ |
| – Recommended Inlet: | 1000 mm |
| – Recommended Outlet: | 500 mm |